DETERMINATION OF THE OPTIMUM INSULATION THICKNESS FOR DIFFERENT ORIENTATIONS OF EXTERNAL WALLS OF A RESIDENTIAL BUILDING IN TASHKENT, UZBEKISTAN

Authors

  • Abdullaev Nodirbek Azatvay Ogli
  • Bo’riyev Elbek Tashkent State Technical University, Energy Faculty, Universitetskaya 2, 100095, Tashkent, Uzbekistan

Keywords:

cooling load, heating load, life cycle saving, optimum insulation thickness, transient simulation

Abstract

Annual heating and cooling transmission loads are being calculated based on transient heat flow through the external walls and by using hourly climatic data. Additionally, we performed a financial analysis based on the Life Cycle Savings (LCS) method, for each wall configuration and orientation, as well as for various thicknesses of insulation material. Depending on the wall type and orientation, the optimum insulation thickness was found to be between 3.75 cm and 11.0 cm.

Downloads

Published

2023-06-12

How to Cite

Abdullaev Nodirbek Azatvay Ogli, & Bo’riyev Elbek. (2023). DETERMINATION OF THE OPTIMUM INSULATION THICKNESS FOR DIFFERENT ORIENTATIONS OF EXTERNAL WALLS OF A RESIDENTIAL BUILDING IN TASHKENT, UZBEKISTAN. Academia Science Repository, 4(6), 113–128. Retrieved from http://academiascience.com/index.php/repo/article/view/802

Issue

Vol. 4 No. 6 (2023): wos

Section

Articles

License

Copyright (c) 2023 Web of Scientist: International Scientific Research Journal

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.